PTI Inspection Systems willPTI Inspection Systems will showcase a new technology platform to test blister packaging at Pack Expo International, November 6-9, 2016 at McCormick Place in Chicago IL in Booth S-2169.
The VeriPac UBV Leak Detection System is a deterministic non-destructive technology designed specifically for multi-cavity blister packs. The VeriPac UBV utilizes volumetric imaging under vacuum to detect the presence of leaks. It’s a simple, rapid 3-step process to test a blister pack. Operators follow these 3 steps: showcase a new technology platform to test blister packaging at Pack Expo International, November 6-9, 2016 at McCormick Place in Chicago IL in Booth S-2169. The VeriPac UBV Leak Detection System is a deterministic non-destructive technology designed specifically for multi-cavity blister packs. The VeriPac UBV utilizes volumetric imaging under vacuum to detect the presence of leaks. It’s a simple, rapid 3-step process to test a blister pack. Operators follow these 3 steps:
- Input number of blister cavities
- Place the blister pack on the inspection plate
- Press the START button
Within seconds, the operator sees a definitive pass/fail result, along with a volumetric measurement reading. The location of the defective cavity is also identified. This technology is unique in that it can provide rapid detection of defects as small as 10 microns in a test cycle of less than 15 seconds using no tools or test parameter changes.
We invite customers to bring their blister pack samples to Interphex, and we’ll test their samples right in the booth.
Benefits:
- Non-destructive technology
- Accurate and repeatable results
- Qualitative pass/fail and quantitative test result data
- Completely tool-less
- Fast changeover to test different blister formats
- Identifies which cavity is defective
- Eliminates destructive, subjective testing methods
About PTI Inspection Systems:
PTI Inspection Systems is the leading manufacturer of non-destructive package inspection technologies for the pharmaceutical industry. We offer inspection systems for package integrity testing, seal integrity, leak testing and container closure integrity testing (CCIT). Our technologies exclude subjectivity from package testing, and use test methods that conform to ASTM standards. PTI Inspection systems provide repeatable, reliable results and can be used at any point in the manufacturing process as they are non-destructive, non-invasive and require no sample preparation. Visit www.ptiusa.com
Contact PTI for more information:
Michelle Wolf:
973-252-6039/973.479.8626
m.wolf@ptiusa.com
Jesse Sklar:
914.337.2005
j.sklar@ptiusa.com
Oliver Stauffer :
914.337.2005
o.stauffer@ptiusa.com
